![]() ![]() Horizontal tanks may be single or double wall construction. Only new steel materials are used in tank constructions.Įach tank is sized with the appropriate normal and emergency vent openings as defined in the tank's standard of construction. Tanks can be furnished with stationary support saddles, anti roll supports or structural skids. Maximum allowable working pressure is 0.5 psig as measured from top of tank. ![]() If your project is required to follow NFPA 30 or 30A guidelines…Check with your area "Authority Having Jurisdiction" related to maximum allowable tank capacity for the class fuel being stored and secondary containment requirements.UL-142 tanks are steel atmospheric tanks intended for aboveground storage of non-corrosive, stable, flammable, and combustible liquids. Fireguard tanks are built in accordance with the Steel Tank Institute's F-941 standard.įireguard's UL-2085 construction standard meets and exceeds all the requirements set forth by UL-2080 for Fire Resistant Tanks. Fireguard tanks also meet the CARB, California Air Resource Board, testing requirements for air emissions. Fireguard tanks are built to Underwriters Laboratories, UL-142 and UL 2085 specifications. Each tank contains 3 inches of light-weight insulation material which has 75% less weight than traditional concrete insulations. These tanks may also be built with or without multiple compartments for multiple fuel storage. It can be built in horizontal and vertical configurations. This is a steel double wall aboveground storage tank with interstitial monitoring capabilities and a 2-hour fire rating. Fireguard® is a "Protected" Fire Rated Aboveground Storage Tank with projectile, impact resistant and stream hose test ratings. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |